CBSE Class 12 Physics Viva Questions with Answers 2023-24

The CBSE Class 12 Physics viva questions with answers will give students an idea about the type of questions that can be asked in the viva, and students can also check their preparation level.

The top 35+ CBSE Class 12 Physics Viva Questions with Answers 2023-24 have been listed below with their answers for students to practice and prepare for their viva and perform excellently in CBSE 12th Board exam.

These inquiries are crucial since they shed light on the skill and knowledge levels of the pupils. They also support the evaluation of pupils' overall academic achievement. Having practical knowledge can also help students to become more interested in a subject.

CBSE Class 12 Physics Viva Questions with Answers 2023-24

CBSE Class 12 Physics Viva questions are based on all the important topics Ohm’s law, Electricity, Reflection and refraction, Atmospheric refraction, Sources of energy, Chemical reaction and equation, Chemical properties of metals, Concave and convex mirrors, Magnetic field and Lens formula and magnification.

Q1. Define Ohm’s law.

Ans. The current that flows through most conductors is directly proportional to the voltage applied. The voltage across a conductor is directly proportional to the current flowing through it, provided all physical conditions and temperatures remain constant.

Q2. What is the formula of Ohm’s law?

Ans. Ohm’s law is given by the formula: V=IR Where, I=current, V=voltage, and R=Resistance.

Q3. What is specific resistance?

Ans. The resistance offered per unit length and unit cross-sectional area when a known amount of voltage is applied is known as the specific resistance.

Q4. What is the SI unit of the potential difference?

Ans. The SI unit of the potential difference is volt.

Q5. The current is measured in which unit?

Ans. The unit of electric current is Ampere.

Q6. What is the unit of resistance?

Ans. The unit of the electrical resistance is Ohms.

Q7. Does the resistance depend on the temperature?

Ans. Yes, the resistance depends on the temperature. As the temperature increases, the resistance also increases.

Q8. What are the various sources of error while performing this experiment?

Ans. Various sources of error are:

The instrument screws may be loose.

Lack of thick connecting wires.

Using rheostat of high resistance.

Q9. What is electrical conductivity?

Ans. It is the measure of the ability of the material to allow the electric current to pass through it.

Q10. Define a rheostat.

Ans. A rheostat is a two-terminal electrical device. The rheostat is a variable resistor whose resistance can be changed to change the current flowing amount through a circuit.

Q11. State true or false: The potential difference across the wire varies linearly with the current.

Ans. True, the potential difference across the wire varies linearly with the current.

Q12. Does the resistance depend on the dimensions of the conductor?

Ans. Yes, the resistance depends on the dimensions of the conductor.

Q13. Give one example of a substance whose resistance lowers with an increase in temperature.

Ans. A semiconductor is the best example.

Q14. How is a conductor’s resistance affected by an increase in temperature?

Ans. A conductor’s resistance increases when the temperature rises.

Q15. How is an ammeter connected to an electric circuit?

Ans. An ammeter is usually joined in series in the electric circuit.

Q16. What is the main procedure to convert a galvanometer into an ammeter?

Ans. A galvanometer is typically converted into an ammeter by linking a suitable low resistance wire (shunt) in parallel orientation with it.

Q17. How are voltmeters attached to an electric circuit?

Ans. Voltmeters are always connected in parallel.

Q18. What is the main procedure to convert a galvanometer into a voltmeter?

Ans. A galvanometer is typically converted into a voltmeter by linking a high resistance in series orientation with it.

Q19. What is a potentiometer?

Ans. A potentiometer is an electrical apparatus used for precise calculation of minute potential differences and to analyse the e.m.f.s of the available primary cells.

Q20. What is the difference between a scalar and a vector quantity?

Ans. A scalar quantity has only magnitude, while a vector quantity has both magnitude and direction.

Q21. What is the SI unit of force?

Ans. The SI unit of force is the newton (N).

Q22. What is Newton's second law of motion?

Ans. Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.

Q23. What is the difference between mass and weight?

Ans. Mass is the measure of the amount of matter in an object, while weight is the force of gravity acting on an object.

Q24. What is the principle of moments?

Ans. The principle of moments states that the sum of the moments of all the forces acting on a body is equal to zero.

Q25. What is the difference between work and power?

Ans. Work is the transfer of energy from one object to another, while power is the rate at which work is done.

Q26. What is the law of conservation of energy?

Ans. The law of conservation of energy states that energy cannot be created or destroyed, but it can be transformed from one form to another.

Q27. Which four precautions must be taken while experimenting to verify Ohm’s law?

Ans. (i) All connections should be kept tight.

(ii) The zero error in the ammeter and voltmeter should be noted down and taken into consideration while taking readings for the measurement.

(iii) The bare ends of the connecting wires should be rubbed and cleaned properly with sandpaper.

(iv) The value of the current through the circuit should be kept as low as possible to avoid heating of the resistor.

Q28. What is the difference between a conductor and an insulator?

Ans. A conductor is a substance that allows electricity to pass through it, while an insulator is a substance that does not allow electricity to pass through it.

Q29. What is the principle behind the experiment you performed to verify Ohm's law?

Ans. The voltage across a conductor is directly proportional to the current through it provided that all physical conditions and temperature remain the same.

Q30. What is the significance of the slope of the graph in the experiment to plot a graph of the dependence of potential difference across a resistor on current?

Ans. The slope of the straight line gives the resistance of the resistor.

Q31. How do you connect the resistors in series and in parallel in the experiment to find the equivalent resistance?

Ans. In a series arrangement, resistors are connected end-to-end while in a parallel circuit, the terminals of resistors are connected to the same two nodes.

Q32. What is the difference between a series circuit and a parallel circuit?

Ans. In a series circuit, the components are connected in a line, one after the other, while in a parallel circuit, the components are connected in branches.

Q33. What is the difference between a convex lens and a concave lens?

Ans. A convex lens bends light rays towards each other, while a concave lens bends light rays away from each other.

Q34. What are the sources of error in the experiment you performed to determine the focal length of a convex mirror?

Ans. Two major sources of error are:

(i) The uprights are not ideally vertical.

(ii) The pole of the mirror, the tip of the object needle and the optical centre are not placed in a line.

Q35. What is the difference between a real image and a virtual image?

Ans. A real image is formed when light rays from an object converge at a point, while a virtual image is formed when light rays appear to diverge from a point but do not actually converge.

Q36. What is the difference between refraction and reflection of light?

Ans. Reflection is the bouncing back of light when it strikes a smooth surface. Refraction is the bending of light rays when it travels from one medium to another.

Also Read: CBSE Class 12th Physics Syllabus 2023-24: Download PDF