Table of Contents
LEET syllabus 2023 will be released by Haryana State Technical Educational Society (HSTES). The desired aspirants can go through the below Haryana LEET 2023 Syllabus.
LEET 2023 Syllabus
The syllabus for the various subjects and topics used in the preparation of Haryana LEET 2023 Exam has been described in depth below for each section of the entrance test:
Section A of LEET(Subject-Basic Sciences)
A1 Mathematics for LEET:
- Arithmetic.
- Geometric.
- Harmonic Progressions.
- Binomial expansion.
- Successive differentiation.
- Maxima and Minima
- Partial Differentiation
- Definite and indefinite Integration.
- First-order and first-degree ordinary differential equations.
- Matrices.
- Elementary operations.
- The rank of a matrix
- Parabola
- Ellipse and Hyperbola
- Differentiation of a function
- Implicit function
- Parametric function
A2 Physics:
- Units and Dimensions with Dimensional analysis and their Limitations
- Motion in one and two dimensions and Newton’s Laws of Motion
- Heat and temperature, measurement of temperature and mode of transfer of heat and their laws
- Geometric optics and simple optical instruments
- Simple laws of electrostatics and their use to find the E and Potential, Capacitors and dielectric constant
- Laser, its principle and use, superconductivity, Conventional and non-conventional energy sources
- Work and Energy and Conservation Laws of Energy
- Properties of matter i.e. elasticity, surface tension, and viscosity in a fluid motion
- Waves and vibration, Characteristics of waves and simple Harmonic motion
- Rotational motion, Conservation of angular momentum
- Gravitation, Newton’s law of gravitation, Kepler’s law and Satellite
A3 Chemistry
Hard and soft water, types of hardness, disadvantages of the hardness of water, its causes, and its remedies and a brief introduction to the terms
- Acidity
- Basicity
- Ionization
- Equivalent weight
- PH value
Definition of symbol, formula, valency and chemical equation.
A4 Communication Skills
Words, antonyms, and synonyms, communication technique grammatical ability
- Proposition
- Tenses
- Correction of incorrect sentences
- Correction
- Narration
- Punctuation
A5 General Awareness
General awareness about the country. Also general awareness about Polytechnics, Technical Education in Haryana such as:
- Name of Polytechnic, Number of Polytechnics and sanctioned intake
- Eligibility for admission to LEET
- Number of Institutions offering BE/B.Tech. & B.Pharmacy
- Name the Processes involved in on-line off-campus counselling
General awareness about Haryana
- Number of Districts/Tehsils/Blocks/villages
- The Total population of State/Area of state/Boundary states of Haryana, History of Haryana
- Name of Chief Minister/Other Ministers/Governor
Downloadable Resources for LEETs
- KCET
- TS EAMCET
- JEE Main
- TANCET
- VITEEE
- GUJCET
- Rajasthan JET
- JKCET
- CUET PG
- WBJEE
- DECE LE
- AME CET
- CUET
- BITSAT
- SRMJEEE
- KLEEE
- GATE
- CG PET
- Karnataka PGCET
- AP Polycet
- AMUEEE
- TS POLYCET
- HPCET
- TS PGECET
- BEEE
- AP ECET
- AEEE
- JEE Advanced
- KIITEE
- OJEE
- LPUNEST
- IPU CET
- JNUEE
- JCECE
- KEAM
- COMEDK UGET
- CUSATCAT
- ITM NEST
- JMI EEE
- BVP CET
- GITAM GAT
- AP PGECET
- MHT CET
- MU OET
- SAAT
- ISI Admission Test
- Assam CEE
- VTUEEE
- BUAT
- MDUCEE
- IMUCET
- CEE AMPAI
- Amity JEE
- ITSAT
- IEMJEE
- HITSEEE
- VSAT
- TS ECET
- AUCET
- Allahabad University PGAT
- Gujarat PGCET
- NPAT
- MRNAT
- UPESEAT
- GEEE
- JNU CEEB
- DCECE
KCET 2025 Previous Year Question Paper
with Solutions
KCET 2025 Answer Key
with Solutions
KCET 2024 Answer Key
with Solutions
KCET Answer Key
with Solutions
KCET 2024 Practice Question Paper 1
with Solutions
KCET 2020 Practice Question Paper 2
with Solutions
TS EAMCET 2025 Practice Question Paper 1
with Solutions
TS EAMCET 2024 Practice Question Paper 2
with Solutions
TS EAMCET 2020 Practice Question Paper 3
with Solutions
TS EAMCET 2019 Practice Question Paper 4
with Solutions
JEE Main 2025 Answer Key
with Solutions
JEE Main 2024 Answer Key
with Solutions
JEE Main 2023 Answer Key
with Solutions
JEE Main 2022 Answer Key
with Solutions
JEE Main 2024 Previous Year Question Paper
with Solutions
JEE Main 2023 Previous Year Question Paper
with Solutions
JEE Main 2022 Previous Year Question Paper
with Solutions
JEE Main 2024 Practice Question Paper 1
with Solutions
TANCET 2025 Previous Year Question Paper
with Solutions
TANCET 2020 Practice Question Paper 1
with Solutions
VITEEE 2025 Answer Key
with Solutions
VITEEE 2020 Practice Question Paper 1
with Solutions
GUJCET 2025 Answer Key
with Solutions
GUJCET 2020 Practice Question Paper 1
with Solutions
Rajasthan JET 2025 Practice Question Paper 1
with Solutions
Rajasthan JET 2024 Previous Year Question Paper
with Solutions
JKCET 2025 Answer Key
with Solutions
CUET PG 2024 Practice Question Paper 1
with Solutions
CUET PG 2023 Previous Year Question Paper
with Solutions
WBJEE 2024 Previous Year Question Paper
with Solutions
WBJEE 2020 Practice Question Paper 1
with Solutions
DECE LE 2024 Previous Year Question Paper
with Solutions
DECE LE 2024 Practice Question Paper 1
with Solutions
AME CET 2024 Practice Question Paper 1
with Solutions
AME CET 2020 Practice Question Paper 2
with Solutions
AME CET 2023 Previous Year Question Paper
with Solutions
AME CET 2021 Previous Year Question Paper
with Solutions
AME CET 2019 Previous Year Question Paper
with Solutions
CUET 2024 Practice Question Paper 1
with Solutions
CUET 2023 Practice Question Paper 2
with Solutions
CUET 2020 Practice Question Paper 3
with Solutions
CUET 2023 Previous Year Question Paper
with Solutions
CUET 2022 Previous Year Question Paper
with Solutions
BITSAT 2024 Previous Year Question Paper
with Solutions
BITSAT 2020 Previous Year Question Paper
with Solutions
BITSAT 2024 Practice Question Paper 1
with Solutions
BITSAT 2020 Practice Question Paper 2
with Solutions
SRMJEEE 2024 Practice Question Paper 1
with Solutions
SRMJEEE 2021 Practice Question Paper 2
with Solutions
KLEEE 2024 Previous Year Question Paper
with Solutions
KLEEE 2023 Previous Year Question Paper
with Solutions
GATE 2024 Previous Year Question Paper
with Solutions
GATE 2021 Previous Year Question Paper
with Solutions
GATE 2022 Answer Key
with Solutions
GATE 2021 Answer Key
with Solutions
GATE 2021 Practice Question Paper 1
with Solutions
CG PET 2024 Previous Year Question Paper
with Solutions
CG PET 2023 Answer Key
with Solutions
CG PET 2020 Practice Question Paper 1
with Solutions
Karnataka PGCET 2024 Answer Key
with Solutions
Karnataka PGCET 2020 Practice Question Paper 1
with Solutions
AP Polycet 2024 Answer Key
with Solutions
AP Polycet 2020 Practice Question Paper 1
with Solutions
AMUEEE 2023 Previous Year Question Paper
with Solutions
AMUEEE 2020 Practice Question Paper 1
with Solutions
TS POLYCET 2023 Answer Key
with Solutions
TS POLYCET 2020 Practice Question Paper 1
with Solutions
HPCET 2022 Previous Year Question Paper
with Solutions
HPCET 2020 Practice Question Paper 1
with Solutions
TS PGECET 2022 Previous Year Question Paper
with Solutions
TS PGECET 2020 Practice Question Paper 1
with Solutions
BEEE 2021 Practice Question Paper 1
with Solutions
AP ECET 2020 Answer Key
with Solutions
AP ECET 2020 Previous Year Question Paper
with Solutions
AP ECET 2020 Practice Question Paper 1
with Solutions
AEEE 2020 Previous Year Question Paper
with Solutions
AEEE 2020 Practice Question Paper 1
with Solutions
JEE Advanced 2020 Practice Question Paper 1
with Solutions
KIITEE 2020 Practice Question Paper 1
with Solutions
OJEE 2020 Practice Question Paper 1
with Solutions
LPUNEST 2020 Practice Question Paper 1
with Solutions
IPU CET 2020 Practice Question Paper 1
with Solutions
JNUEE 2020 Practice Question Paper 1
with Solutions
JCECE 2020 Practice Question Paper 1
with Solutions
KEAM 2020 Practice Question Paper 1
with Solutions
COMEDK UGET 2020 Practice Question Paper 1
with Solutions
CUSATCAT 2020 Practice Question Paper 1
with Solutions
ITM NEST 2020 Practice Question Paper 1
with Solutions
JMI EEE 2020 Practice Question Paper 1
with Solutions
BVP CET 2020 Practice Question Paper 1
with Solutions
GITAM GAT 2020 Practice Question Paper 1
with Solutions
AP PGECET 2020 Practice Question Paper 1
with Solutions
MHT CET 2020 Practice Question Paper 1
with Solutions
MU OET 2020 Practice Question Paper 1
with Solutions
SAAT 2020 Practice Question Paper 1
with Solutions
ISI Admission Test 2020 Practice Question Paper 1
with Solutions
Assam CEE 2020 Practice Question Paper 1
with Solutions
VTUEEE 2020 Practice Question Paper 1
with Solutions
BUAT 2020 Practice Question Paper 1
with Solutions
MDUCEE 2020 Practice Question Paper 1
with Solutions
IMUCET 2020 Practice Question Paper 1
with Solutions
CEE AMPAI 2020 Practice Question Paper 1
with Solutions
Amity JEE 2020 Practice Question Paper 1
with Solutions
ITSAT 2020 Practice Question Paper 1
with Solutions
IEMJEE 2020 Practice Question Paper 1
with Solutions
HITSEEE 2020 Practice Question Paper 1
with Solutions
VSAT 2020 Practice Question Paper 1
with Solutions
TS ECET 2020 Practice Question Paper 1
with Solutions
AUCET 2020 Practice Question Paper 1
with Solutions
Allahabad University PGAT 2020 Practice Question Paper 1
with Solutions
Gujarat PGCET 2020 Practice Question Paper 1
with Solutions
NPAT 2020 Practice Question Paper 1
with Solutions
MRNAT 2020 Practice Question Paper 1
with Solutions
UPESEAT 2019 Previous Year Question Paper
with Solutions
UPESEAT 2019 Practice Question Paper 1
with Solutions
GEEE 2019 Practice Question Paper 1
with Solutions
JNU CEEB 2018 Previous Year Question Paper
with Solutions
JNU CEEB 2018 Practice Question Paper 1
with Solutions
DCECE Answer Key
with Solutions
Section B of LEET (Subject- Electronics Stream Courses)
B1 Elements of Electrical Engineering for LEET:
The syllabus for this is stated below:
- Electrical and Magnetic Circuits, EMF, Kirchhoff’s laws and Faraday’s Laws, Network theorems.
- Induction Motor, Principle, construction and operation of three-phase induction motors.
- Transmission and Distribution, Advantage of high voltage for transmission, comparison of 3 phase, single phase, 2 phase, and three-wire D.C.Systems
- AC Circuits, RMS value, the behaviour of RLC elements, series and parallel circuits, series and parallel resonance circuits.
- Transformers, Introductions to single-phase and three-phase transformers.
- DC Machines, Theory, constructions, and operation of DC generator and motor.
B2 Elements of Electronics Engineering for LEET:
The syllabus for the elements of Electronics Engineering includes the following:
- Analog Electronics, Semiconductor diode circuits, Zener diode, and Zener diode circuits, LED, Photodiode, BJT, FET & their configurations and characteristics, Biasing, small-signal & large signal amplifiers, OPAMPS, oscillators, regulated power supply.
- Digital Electronics, Number System, conversion from one to another system, Binary arithmetic, codes conversion & parity; Logic gates; Boolean algebra, Flip, Flop. Industrial Electronics and Control, SCR, DIAC, TRIAC.
- Measurements & Instrumentation, Errors, standards, accuracy precision resolution, Ammeters, voltmeters, wattmeters and energy meters, insulation tester, earth tester, multimeter, CRO, measurement of V, I & F on CRO low, medium & high resistance measurement, AC Bridges, Transducers for measurement of temperature, displacement, Communication System, Types of modulation, demodulation.
B3 Elements of Computer Engineering for LEET:
The syllabus for this has been described below:
- Fundamentals of Computers, Organization of Digital Computers, Data Processing, High-Level Languages, Translators, Compilers, Interpreters, algorithms, Flow Charting, Instructions, assembly language Programming.
- Computer Organization, Overview of registers, bus organized computers, instruction set, Instruction execution, Hard-wired and microprogrammed control units, Processor
- Programming in C, Steps in Program development, flowcharting, algorithm, C Language: Data types, Console I/O program control statements, arrays, structures, unions functions, pointers, enumerated data types and type statement, File handling, C standard library and header files.
- Basic of Computer networking, LAN, WAN, Internet & Application.
- Organization. Memory Organization: Cache and virtual memory, I/O organization.
- Operating Systems, Overview of Operating Systems, Basic functions, the concept of process, scheduling, memory management, critical section, synchronization, monitors.
Section C of Haryana LEET(Subject-Mechanical Stream Courses)
C1 Elements of Mechanical Engineering for LEET:
The topics for preparation have been listed below:
- Applied Mechanics, Friction, laws of friction, friction applications, the centroid of a plane area, simple machines, screw jack, wheel & axles, the system of pulleys, projectile, work, power, energy.
- Strength of materials, Stress, Strain, Hooks law, stress-strain diagram, temperature stresses, composite section, Relation between elastic constants, (E.C.G.) Resilience, Principal stresses, principal planes, B.M. & S.F. diagram for simply supported and cantilevers, beams, columns & structs.
- Thermodynamics, First law of thermodynamics, the second law of thermodynamics, zeroth law, steam properties, Diesel cycle, motorcycle.
- Modes of Heat Transfer (Conduction, Convection, Radiation).
- Fluid Mechanics, Properties of fluid, Viscosity, Newtonian and Non-Newtonian fluids, Bernoulli’s Theorem, Types of Fluid flows, Dimensionless
- numbers, Measurement of fluid flow by the pilot tube, Venturimeter, Darcy equation.
C2 Elements of Production Engineering/Manufacturing Process for LEET:
- Workshop Technology, Lathe- operations, turning machining Time, cutting speed, feed, depth of cut, Drilling, Type of drilling machines, Drilling operation, Drilling time, Milling, up milling, down milling, milling operations, milling cutters, milling time, Shaper & Planer Working Principle, Measuring Instruments and Gauges, Vernier Caliper, Micrometer, Sine Bar, Plug gauges, snap gauges, ring gauges welding, Soldering, Brazing.
- Material Science, Engg. Materials, Mechanical properties of materials, hardness testing methods, heat treatment, hardening annealing, tempering, carburizing, Normalizing.
- Engineering Graphics & Drawing, First angle, and third angle projection methods, orthographic views, Isometric views, conventions for lines and materials, Projections of lines and solids (only conceptual questions).
- Foundry, Pattern and their types, moulds and moulding materials.
- Plastic & their properties, various moulding processes of plastic.
- Industrial management, types of organizational structure, qualities & responsibilities of a good leader, methods of quality control, productivity.
C3 Automobile Engineering for LEET:
The syllabus for Automobile Engg. Has been stated below:
Power flow in an automobile
- Gearbox & its types,
- Use and types of breaks,
- Types of clutches,
- Types of wheels and tyre used in Automobile,
- Major automobile industries.
- Basic knowledge of differential,
- Cooling
- Lubrication of Engine.
Section D (Subject-Other Engineering Streams)
D1 Civil Engineering Courses for LEET:
The syllabus for Civil Engg. Has been presented below:
- Introduction to brick, raw materials for bricks, manufacturing of bricks, brickwork in a foundation.
- Index properties of soil, seepage of soil.
- Water demand for industrial/Commercial & domestic purposes, per capita demand, various sources of water, Treatment & Disposal of sludge
- Types of foundation (Design not included), Repair & Maintenance of Buildings, Basic principles of surveying chain surveying, BenchMark, compass surveying, Basics of RCC (elementary knowledge) different grades of concrete, workability, mixing of concrete, compaction of concrete
- Classification & suitability of various types of doors, roofs.
- Name of earthmoving machinery, different types of road material, flexible & rigid pavements, classification of bridges
- Water requirement of crops, methods of irrigations Concept/meaning/need/competencies/qualities of Entrepreneur classifications of dams & site selection for reservoir classifications of rocks
- Various types of cement & their uses
- The basis of Ecology, Pollution of water its causes & remedial near, Role of non-conventional sources of energy.
D2 Textile Engineering Courses:
The syllabus is as follows:
- Different types of fibres, Fabrics & yarn manufacturing & performance, Weaving Technology
- Textile testing & quality control
- Modern methods in yarn products
- Bleaching, Dyeing & Printing.
D3 Chemical/ Printing Engineering:
Elementary knowledge of; Fluid Flow, Chemical process industry, Agro-based industries, Petrochemicals Introduction of printing machines/presses, types of printing.
D4 Ceramic Engineering:
Classification of various pottery productions, ceramic material & their properties.
D5 Food Technology:
This includes a study about vitamins, cereals, pulses, milk and milk powder and preservation of food processor.
D6 Other Engineering Courses
- D6 (i) Agriculture: Introduction to farm equipment.
- D6 (ii) Architecture: History of Indian architecture, building topologies.
- D6 (iii) Fashion Design and Fashion Technology: Knowledge of fashion technology, history, and culture, introduction to garment manufacturing machines and tools.
