GATE Mining Engineering Syllabus 2024: Weightage, Best Books

Topics such as Surface Environment, Mine Ventilation and Underground Hazards, Mining Methods and Machinery, Mineral Economics, Mine Planning, Systems Engine are included in the GATE Mining Engineering syllabus 2024.

The GATE Mining Engineering Syllabus is divided into sub-parts. The paper will be including three sections: General Aptitude, Engineering Mathematics, and Mining Engineering (MN) Subjects.

The candidates need to learn the topics covered in the subject for cracking the GATE 2024 exam. Furthermore,There will be 65 questions in the exam; the time allocated is three hours. Moreover, the candidates need to focus on the weightage of each topic to clear the exam.

Table of Contents

GATE General Aptitude Syllabus
GATE Mining Engineering (MN) Section-wise Syllabus
GATE Mining Engineering Section-wise Weightage
Best Books for GATE Mining Engineering Preparation

GATE General Aptitude Syllabus

The General Aptitude section is common for all papers of the GATE exam. The various topics in this section are given below for your reference.

GATE General Aptitude Syllabus
Topics	Sub-topics
Verbal Aptitude	Basic English Grammar: Tenses, Articles, Adjectives, Prepositions, Conjunctions, Verb-Noun Agreement, and Other Parts of SpeechBasic Vocabulary: Words, Idioms, and Phrases In Context Reading and Comprehension, Narrative Sequencing.
Quantitative Aptitude	Data Interpretation: Data Graphs (Bar Graphs, Pie Charts, and Other Graphs Representing Data), 2- and 3-Dimensional Plots, Maps, and TablesNumerical Computation and Estimation: Ratios, Percentages, Powers, Exponents and Logarithms, Permutations and Combinations, and SeriesMensuration and GeometryElementary Statistics and Probability.
Analytical Aptitude	Logic: Deduction and InductionAnalogyNumerical Relations and Reasoning.
Spatial Aptitude	Transformation of Shapes: Translation, Rotation, Scaling, Mirroring, Assembling, and GroupingPaper Folding, Cutting, and Patterns In 2 and 3 Dimensions.

Also Read: GATE Syllabus

GATE Mining Engineering (MN) Section-wise Syllabus

GATE Mining Engineering (MN) Syllabus comprises the subjects that candidates have studied at their graduation level. The GATE mining syllabus has been given section wise below.

Quick Download:

GATE Mining Engineering Syllabus

Download PDF

GATE Engineering Mathematics Syllabus

Engineering Mathematics is the branch of applied mathematics that comprises the knowledge of mathematical methods and techniques that are used in Engineering. The following are the various topics and sub-topics to be covered under this section.

GATE Engineering Mathematics Syllabus
Topics	Sub-topics
Linear Algebra	Matrices and Determinants, Systems and Linear Equations, Eigenvalues and Eigenvectors
Calculus	Limit, Continuity and Differentiability; Partial Derivatives; Maxima and Minima; Sequences and Series; Test for Convergence; Fourier Series.
Vector Calculus	Gradient; Divergence and Curl; Line, Surface and Volume Integrals; Stokes, Gauss and Green’s Theorems
Differential Equations	Linear and Non-Linear First Order Odes; Higher Order Linear Odes with Constant Coefficients; Cauchy’s and Euler’s Equations; Laplace Transforms; Pdes –Laplace, One Dimensional Heat and Wave Equations.
Probability and Statistics	Definitions and Probability and Sampling Theorems, Conditional Probability, Mean, Median, Mode and Standard Deviation; Random Variables; Poisson, Normal and Binomial Distributions; Correlation and Regression Analysis.
Numerical Methods	Solutions and Linear and Non-Linear (Bisection, Secant, Newton-Raphson Methods) Algebraic Equations; Integration By Trapezoidal and Simpson’s Rule; Single and Multi-Step Methods for Differential Equations.

Also Check: GATE Engineering Sciences Syllabus 2024

GATE Mining Geology, Mine Development and Surveying Syllabus

Mine Geology is a branch of economic geology that deals with the application of geology to mining. The various topics in this subject are as follows.

GATE Mining Geology, Mine Development and Surveying Syllabus
Topics	Sub-topics
Mining Geology	Minerals, Rocks and their Origin, Classification, Ore Genesis; Structural Geology.
Mine Development	Methods of Access to Deposits; Underground Drivages; Drilling Methods and Machines; Explosives and Energetics, Blasting Devices, Blast Design Practices; Rock-Tool Interaction Applicable to Mechanical Cutting Systems and their Selection.
Mine Surveying	Levels and Levelling, Theodolite, Tacheometry, Triangulation; Contouring; Errors and Adjustments; Correlation; Underground Surveying; Curves; Photogrammetry; EDM, Total Station, GPS, Basics of GIS and Remote Sensing.

GATE Geomechanics and Ground Control Syllabus

This section comprises major topics such as engineering mechanics, geomechanics and ground control. These are further divided into the following sub-topics.

GATE Geomechanics and Ground Control Syllabus
Topics	Sub-topics
Engineering Mechanics	Equivalent force systems; Equations of Equilibrium; Two Dimensional Frames and Trusses; Free Body Diagrams; Friction forces; Particle kinematics and Dynamics; Beam Analysis.
Geomechanics	Geo-Technical Properties of Rocks; Rock Mass Classification; Instrumentation and In-Situ Stress Measurement Techniques; Theories of Rock Failure; Ground Vibrations; Stress Distribution Around Mine Openings; Subsidence; Slope Stability.
Ground Control	Design of Pillars; Roof Supporting Systems; Mine Filling. Strata Control and Monitoring Plan.

Also Check: GATE Architecture and Planning (AR) Syllabus 2024

GATE Mining Methods and Machinery Syllabus

This subject comprises the various Mining processes. The topics are as follows.

GATE Mining Methods and Machinery Syllabus
Topics	Sub-topics
Mining Methods	Surface Mining: Layout, Development, Loading, Transportation and Mechanization, Continuous Surface Mining Systems; Highwall Mining; Underground Coal Mining: Bord and Pillar Systems, Room and Pillar Mining, Longwall Mining, Thick Seam Mining Methods, Underground Metal Mining: Open, Supported and Caved Stoping Methods, Stope Mechanization, Ore Handling Systems.
Mining Machinery	Generation and Transmission of Mechanical, Hydraulic and Pneumatic Power; Materials Handling: Wire Ropes, Haulages, Conveyors, Face and Development Machinery, Hoisting Systems, Pumps; Comminution Methods and Machinery.

Surface Environment, Mine Ventilation and Underground Hazards Syllabus

Topics in this subject are surface environment, mine ventilation and underground hazards. Various sub-topics are mentioned in the table below.

Surface Environment, Mine Ventilation and Underground Hazards Syllabus
Topics	Sub-topics
Surface Environment	Air, Water and Soil Pollution: Standards of Quality, Causes and Dispersion of Contamination and Control; Noise Pollution and Control; Land Reclamation; EIA.
Mine Ventilation	Underground Atmosphere; Heat Load Sources and Thermal Environment, Air Cooling; Mechanics of Airflow, Distribution, Natural and Mechanical Ventilation; Mine Fans and their Usage; AuxiliaryVentilation; Ventilation Survey and Planning; Ventilation Networks.
Underground Hazards	Mine Gases, Methane Drainage; Underground Hazards From Fires, Explosions, Dust and inundation; Rescue Apparatus and Practices; Safety Management Plan; Accident Data Analysis; Assessment; MineLighting; Mine Legislation; Occupational Health and Safety.

Also Check: GATE Geomatics Engineering Syllabus 2024

GATE Mineral Economics, Mine Planning, Systems Engine Syllabus

Mineral Economics is the study of economic aspects of mining. Various sub-topics of Mining Economics are given below.

GATE Mineral Economics, Mine Planning, Systems Engine Syllabus
Topics	Sub-topics
Mineral Economics	Mineral Resource Classification; Discounted Cash Flow Analysis; Mine Valuation; MineralTaxation.
Mine Planning	Sampling Methods, Practices and Interpretation; Reserve Estimation Techniques: Basics of geostatistics and Quality Control; Optimization of Facility Location; Mine Planning and Its Components, Determination of Mine Size and Mine Life; Ultimate Pit Configuration and Its Determination, Optimum Mill Cut-OffGrade and Its Determination, Stope Planning, Design of Haul Road, Selection of Mining System Vis-À-Vis EquipmentSystem.
Systems Engineering	Concepts of Reliability; Reliability of Simple Systems; Maintainability and Availability; Linear Programming, Transportation and Assignment Problems; Network Analysis; Inventory Models; QueuingTheory; Decision Trees.

Read More: Benefits of Writing GATE 2024

GATE Mining Engineering Section-wise Weightage

Given below is the sectional weightage of marks for the GATE Mining Engineering Exam. It is essential that candidates prepare for the GATE mining syllabus accordingly.